Modular Adsorption Dryers

Heat-less Modular Adsorption Dryer consist of multiple high strength aluminum cavity,each cavity is divided into two chambers, each cavity filled with a sorbent that make the wet compressed air achieve dry. When one set cavity working, the other corresponding cavity will use the regeneration way of variable pressure adsorption to achieve regenerate. When regenerating, a part of dry compressed air from work pressure expansion to atmospheric pressure, then go through the water-saturation adsorbent, and take away the moisture, make the absorbent regenera tion.If equipped with the AIRN series of refrigerated dryer,cyclone separator and precision filter will strengthen the running performance and reliability.

Standard Condition
Inlet Air Temperature
≤ 45°C
Ambient Temp.
≤ 30°C
Max. Working Pressure
7 Bar
The Scope of Work
Max. Inlet Air Temperature
50°C
Ambient Temp.
≤ 45°C
Max. Working Pressure
10 Bar
Technical Indicator
Pressure Dew Point
-20°C ~ -40°C
Pressure Loss
≤ 0,21 Bar
Desiccant-Dryer-Modular

Modular Adsorption Dryer Selection Calculation

CFP : Pressure Correction Coefficients
The Lowest Pressure of Inlet Air
Bar
4
5
6
7
8
9
10
CFP
0,63
0,75
0,88
1,00
1,13
1,25
1,38
CFT : Temperature Correction Coefficients
The Lowest Pressure of Inlet Air
°C
25
5
38
40
45
50
CFP
1
1
1
0,97
0,88
0,73

Technical Specification :

Model @0.7MPa,38°C Flowrate(M³/Min) Inline / Outlet Power Supply (V) Weight (Kg) Dimension (mm) L x W x H
HMA - 015 HL
1,5
Internal Thread G1"
220
95
695
400
1070
HMA - 025 HL
2,5
Internal Thread G1"
220
105
695
400
1270
HMA - 035 HL
3,5
Internal Thread G1 1⁄2”
220
119
695
400
1730
HMA - 075 HL
7,0
Internal Thread G1 1⁄2”
220
176
865
400
1730
HMA - 105 HL
10,5
Internal Thread G2”
220
233
1040
400
1730
HMA - 140 HL
14,0
Internal Thread G2”
220
291
1215
400
1730
HMA - 175 HL
17,5
Internal Thread G2 1⁄2”
220
348
1390
400
1730
HMA - 210 HL
21,0
Internal Thread G2 1⁄2”
220
405
1560
400
1730
HMA - 245 HL
24,5
Internal Thread G2 1⁄2”
220
515
1740
400
1730
HMA - 280 HL
28,0
Internal Thread G2 1⁄2”
220
515
1850
400
1730
HMA - 350 HL
35,0
DN 80
220
727
1390
880
1780
HMA - 420 HL
42,0
DN 100
220
876
1500
880
1780
HMA - 490 HL
49,0
DN 100
220
992
1740
880
1780
HMA - 560 HL
56,0
DN 125
220
1111
1850
880
1780
HMA - 630 HL
63,0
DN 125
220
1292
1500
1340
1780
HMA - 735 HL
73,5
DN 125
220
1485
1740
1340
1780
HMA - 840 HL
84,0
DN 150
220
1664
1850
1340
1780